FAQ on EUDR, PPWR and carbon footprint

Pick a topic and find answers to what exporters, importers, manufacturers and compliance teams ask us most.

EUDR frequently asked questions

Regulation (EU) 2023/1115 on deforestation: who it affects, the due diligence statement (DDS), geolocation, TRACES NT and the application dates.

The regulation: what it is, who it affects and when it applies

What is the EUDR?

The EUDR (Regulation (EU) 2023/1115) is the European Union regulation that prohibits importing or exporting certain raw materials and derived products if they come from land deforested or degraded after 31 December 2020. It covers coffee, cocoa, soy, palm oil, wood, rubber, cattle and their derivatives, and requires verifiable data proving where each batch comes from.

Who does the EUDR affect?

The EUDR affects any company that places, trades or exports coffee, cocoa, soy, palm oil, wood, rubber, cattle or products derived from these commodities to or from the EU, regardless of size. Operators (those placing the product on the EU market for the first time) have the strictest obligations; traders who only distribute already-declared products have more limited ones.

What conditions must a product meet to enter the EU under the EUDR?

Three at once: being deforestation-free (no forest conversion after 31 December 2020 and, for wood, no forest degradation), having been produced lawfully under the law of the country of production, and being covered by a due diligence or simplified statement submitted in the EU Information System.

What products and commodities does the EUDR cover?

The EUDR covers seven commodities: coffee, cocoa, soy, palm oil, wood, rubber and cattle, plus an extensive list of derived products such as chocolate, furniture, tyres, leather or paper. If your product contains or is made from any of these commodities, it is likely subject to the EUDR.

When does the EUDR come into force?

Regulation (EU) 2023/1115 entered into force on 29 June 2023. After two postponements, it applies from 30 December 2026 to operators, downstream operators and traders, and from 30 June 2027 to individuals and to micro and small enterprises established by 31 December 2024 (not medium-sized ones, nor downstream operators or traders). New products added to Annex I in 2026 apply from 30 December 2027.

How many times has the EUDR been postponed?

Twice. Regulation (EU) 2024/3234 delayed it by 12 months and Regulation (EU) 2025/2650, of 19 December 2025, by another 12 months, and also simplified some obligations. That is why the current application dates are 30 December 2026 and 30 June 2027.

What does the 31 December 2020 cut-off date mean?

31 December 2020 is the deadline set by the EUDR: any product coming from land deforested or degraded after that date cannot enter or leave the European market, regardless of when the product itself was produced or traded. It is the reference every geolocation must clear for a batch to be valid.

What is the difference between deforestation and forest degradation under the EUDR?

Deforestation is the conversion of forest into land for another use, such as farming or livestock. Forest degradation is a structural change to the forest that reduces its capacity to produce goods and services, without eliminating it entirely. The EUDR prohibits products linked to both situations, not only outright deforestation.

Does the EUDR apply to products already in transit before the application date?

In general, the EUDR applies based on the date the product is placed on or exported from the European market, not on when it was manufactured or shipped. If you have doubts about a specific shipment in transit, it's worth checking with your legal advisor, since transitional rules vary by product type and exact date.

Which products are exempt because of their production or placing-on-the-market date?

Those made with raw materials produced before 29 June 2023 (for cattle, if the animal was born earlier) and products placed on the market before the application date that applies to the company. The burden of proof always lies with the operator, downstream operator or trader. For imported products, placing on the market occurs upon release for free circulation.

What happens with timber covered by the EUTR?

EUTR products placed on the market before 30 December 2026 remain subject to the EUTR and exempt from the EUDR, as are those placed on the market until 31 December 2029 with timber harvested before 29 June 2023. From 31 December 2029, all timber products must comply with the EUDR.

How does the EUDR relate to the Renewable Energy Directive (RED)?

The EUDR and the RED are complementary: both aim to curb deforestation and climate change, and a product subject to the EUDR can also count as renewable energy under the RED if it meets its specific requirements. Low indirect land use change (ILUC) certificates used under the RED can also serve as evidence for the EUDR.

Roles, obligations and company size

What is the difference between an operator and a trader under the EUDR?

An operator is whoever places a product on the European market for the first time or exports it from the EU, and must submit a full DDS with geolocation and risk assessment. A trader distributes a product that another operator has already declared, and their obligations are limited to preserving the traceability of that declaration, not generating it from scratch.

What is a downstream operator?

It is the company in the chain that processes or exports a product already declared by a previous operator. It does not submit the due diligence statement, but it must record its suppliers and customers, keep the statement references and act on signs of non-compliance.

What obligations does an operator have?

Exercise due diligence before placing on the market or exporting, maintain a due diligence system, submit the statement in the EU Information System and include its reference number in the customs declaration. It must review the system at least once a year and keep the documentation for five years. If it is not an SME, it must also report publicly on its system each year.

Who is responsible for a product's compliance?

The operator that places the product on the market or exports it, not its suppliers. Downstream operators and traders are not responsible for the product's compliance, but they are for their information obligations and, where applicable, for verifying that the operator acted with diligence. Third-country companies that only produce and sell raw materials have no direct obligations under the EUDR.

Are SMEs exempt from the EUDR?

No, SMEs are not exempt from the EUDR, but in some cases they do have simplified obligations, such as micro and small primary operators (MSPOs) established in low-risk countries. These companies can submit a simplified declaration instead of a full DDS, but they still need verifiable origin data.

How do I determine whether I am a micro, small or medium enterprise under the EUDR?

Using the thresholds of Directive 2013/34/EU (article 2(30) of the EUDR): micro, up to 450,000 euros balance sheet, 900,000 turnover and 10 employees; small, 5 million, 10 million and 50; medium, 25 million, 50 million and 250. At least two of the three criteria must be met. Recommendation 2003/361/EC is not relevant for the EUDR.

What is a micro or small primary operator (MSPO)?

It is an operator in a low-risk country that produces the raw materials itself and places them on the market or exports them, and that is an individual or a micro or small enterprise. It has its own regime: a simplified statement (Annex III), application from 30 June 2027 and the possibility of identifying plots with a postal address instead of coordinates.

What is the difference between the simplified procedure and the simplified statement?

The simplified due diligence procedure (art. 13) is open to any operator sourcing from low-risk countries and in principle exempts it from assessing and mitigating risk, although it must first assess the complexity of its chain and the risks of circumvention and mixing. The simplified statement (Annex III) is specific to MSPOs.

What does an exporter from a non-EU country have to do under the EUDR?

The obligation to submit the DDS lies with the operator or trader established in the EU, but your European buyers will ask you for origin data: the geolocation of each plot, batch-level traceability and documentation showing there has been no deforestation after 31 December 2020. If you cannot provide it, your product will not be able to enter the EU with a valid DDS.

Can a cooperative submit a DDS on behalf of its members?

Yes, a cooperative or association can act as an authorised representative and submit declarations on behalf of its members, provided it is established in the EU. It can also submit its own DDS if it places the product on the European market itself, rather than its members doing so individually.

Due diligence statement (DDS) and TRACES NT

What is a due diligence statement (DDS)?

A DDS is the document an operator submits in the EU's TRACES NT system before placing a product on the European market, declaring that due diligence has been carried out and that the product is deforestation-free. It must include the geolocation of each plot of origin, a risk assessment and the mitigation measures applied.

What information must a complete DDS include?

A complete DDS must include the operator's identification, the product description and its tariff code, the quantity, the country of production, the geolocation of each plot of origin, and a statement that the risk has been assessed and no significant risk of non-compliance exists. Missing any of these elements invalidates the declaration.

Who submits the due diligence statement?

The operator that places the product on the market or exports it, not its suppliers. It may give a written mandate to a representative established in the EU, or to a customs agent, to submit it on its behalf (art. 6), but the operator remains responsible for the data and the product's compliance.

What is TRACES NT?

TRACES NT is the European Union's official IT system where operators register and submit their due diligence statements (DDS) before placing a product on the European market. It is the mandatory entry point for EUDR compliance: without a valid DDS in TRACES NT, a product cannot enter or leave the EU.

Do I have to state the declaration at customs?

Yes. On import and export, the reference number of the due diligence statement must be included in the customs declaration (art. 26). In those cases, quantities are declared in kilograms of net mass.

How often do you need to submit a DDS?

A DDS must be submitted before each placing on the market or export, although a single declaration can cover several shipments or batches if certain continuity conditions are met. It is not an annual or one-off obligation: it repeats every time a product subject to the EUDR enters or leaves the EU.

Can one DDS cover several shipments or batches at once?

Yes, a single DDS can cover several shipments or batches if they are placed on the market successively over a given period and share the same origin and risk conditions. This reduces the administrative burden for operators with constant flows, as long as each batch keeps its individual traceability down to the plot.

Am I required to share my DDS verification number with my customers?

No, there is no legal obligation to share your DDS verification number with customers or end consumers. You only need to provide it to the competent authorities when requested, or to a direct customer verifying your exercise of due diligence in response to a substantiated concern.

Geolocation and plots

What geolocation data does the EUDR require?

The EUDR requires the geographic coordinates of each production plot: a point with latitude and longitude for plots of 4 hectares or less, and a polygon with enough points to define the perimeter for plots larger than 4 hectares. For cattle, one point per establishment. Without this geolocation, a valid DDS cannot be submitted.

Do I need a polygon or is a geolocation point enough?

It depends on size: for plots of 4 hectares or less a point with latitude and longitude is enough, preferably the central one; for plots larger than 4 hectares a polygon is required. Many chains combine both, because they work with smallholders and larger farms at the same time.

In what format are coordinates uploaded to the Information System?

They are entered manually or with a GeoJSON file of up to 25 MB. There is no limit on points per polygon, but it is best to use enough points without exceeding the file size. Coordinates are in decimal degrees, with at least six decimals, in the WGS84 system (EPSG:4326).

What counts as a plot under the EUDR?

A plot, under the EUDR, is the unit of land where the raw material was produced or harvested, delimited by its exact geographic coordinates. Each plot must be linked to a specific batch in the DDS, and its geolocation is the evidence proving that land has not been deforested after 31 December 2020.

How do I check the quality of the coordinates?

You need to review geometry errors (crossed shapes, duplicates, spikes), mapping inconsistencies (plots over water or settlements, overlaps with other land uses) and the consistency of size and productivity against similar plots. Some countries have national reference databases, and viewers such as SIGPAC allow downloading GeoJSON in WGS84.

Can I use a postal address instead of coordinates?

Only MSPOs, and only if the address clearly identifies the plot or establishment (street, number, postcode, city and country, or cadastral reference). The registered office only works if it is where the raw material is produced, not if it is an administrative office.

What happens if my supplier doesn't give me geolocation data?

Without verified geolocation for each plot of origin, you cannot submit a valid DDS, so the product gets blocked before reaching the European market. It is one of the most common reasons operators now require their suppliers to use a proper origin-data capture system, instead of relying on spreadsheets or manual forms.

Risk, legality and verification

What is EUDR country risk classification?

Country risk classification is the system the European Commission uses to label each country of origin as low, standard or high risk, based on its deforestation data. This classification determines the level of control customs authorities apply to your shipments: high-risk countries face far more frequent inspections.

Which countries are high or low risk under the EUDR?

The Commission classifies them in Implementing Regulation (EU) 2025/1093: 140 countries are listed as low risk, four as high risk and the rest as standard risk. That classification shapes due diligence and controls, and it is tied to the place where the raw material is produced, not the customs origin of the product.

What happens if my country of origin is classified as high risk?

If your country of origin is classified as high risk, your shipments face a much higher inspection rate from customs authorities, and the risk assessment in your DDS must justify in more detail why the specific product is not linked to deforestation. It doesn't stop you from operating, but it demands a stronger level of evidence.

What is a due diligence system?

It is the set of procedures and measures that the operator establishes and keeps up to date to collect information on its products, assess the risk of illegal production and deforestation, and reduce the risks detected. It is an active and continuous exercise, not a one-off document.

Which legislation must be complied with to demonstrate legality?

That of the country where the raw material was produced, that is, where it was harvested, felled or raised: national and regional laws and international law applied in that country. The laws of other countries the product passes through or is processed in do not count for this requirement.

How is it verified that a product is deforestation-free?

It is verified by cross-referencing each declared plot's geolocation with satellite imagery and forest cover databases, to confirm that land has not lost forest after 31 December 2020. The EU's competent authorities carry out these checks systematically, more frequently in countries classified as high risk.

Is a certification enough to comply with the EUDR?

No. Certification and third-party verification schemes can provide useful information for assessing risk, but they do not replace the operator's responsibility and are not enough on their own to demonstrate due diligence. Their use is voluntary and you must analyse what they cover.

If I detect a risk, do I have to give up the product?

Not necessarily. Detecting a risk is a warning sign that requires analysing it and applying measures to reduce it. If after those measures the risk disappears or is negligible, the product can be placed on the market; if it cannot be mitigated, the operator must refrain.

What are circumvention risk and mixing risk?

Circumvention risk is that mechanisms have been used to avoid the EUDR, such as false documents or raw materials from a high-risk country processed in a low-risk one to hide their origin. Mixing risk relates to the complexity of chains and the lack of visibility of some process. Both are also assessed in the simplified procedure.

What is mass balance and why does it matter for the EUDR?

Mass balance is the principle that guarantees the quantity of raw material declared as deforestation-free entering a process matches the quantity of final product leaving it, through every blend, transformation or change of ownership. Without a verified mass balance, a DDS loses its validity because it becomes impossible to prove the final product genuinely comes from the declared origin.

What is preserved identity under the EUDR?

Preserved identity is the level of traceability where a batch keeps its individual, identifiable origin throughout the entire process, without mixing with batches from a different origin. It is the most demanding traceability standard, and the one that offers the strongest guarantees under audit, because every unit of product can be linked to a specific plot.

What is a substantiated concern?

It is a duly reasoned complaint, based on objective and verifiable information about a specific breach of the EUDR. Anyone may submit it to a competent authority or to an operator, downstream operator or trader. Whoever receives it must verify it before continuing to market the product and, in some cases, inform the authorities.

What checks do the competent authorities carry out under the EUDR?

The competent authorities in each country verify that the submitted DDS genuinely matches the physical shipment, check the geolocation against satellite imagery, and can request additional documentation in case of doubt or a complaint. Shipments from high-risk countries face a much higher inspection rate than those from low-risk ones.

Penalties, record-keeping and communication

What happens if you don't comply with the EUDR?

If you don't comply with the EUDR, your product can be held at the border, suspended from the European market, or rejected outright by your buyer before it even reaches customs. The competent authorities in each country can impose financial penalties and, in serious cases, temporarily ban your company from operating in the EU market.

What penalties exist for failing to comply with the EUDR?

They are set by each Member State (art. 25), but the maximum level of fines must be at least 4 % of the infringer's annual EU turnover. Confiscation of the products and revenue, temporary exclusion from public procurement and a temporary ban on marketing may also be imposed.

How long must EUDR documentation be kept?

Five years: the due diligence documentation, system updates and statements. The system must be reviewed at least once a year, or sooner if there are relevant developments.

Can I use a “EUDR compliant” seal or logo?

No. The EUDR does not regulate any badge, and using the reference “EUDR” as a distinctive sign could be considered an unfair commercial practice: Directive (EU) 2024/825 prohibits sustainability labels that are not based on a certification scheme or established by public authorities.

How Retexcycle solves it

How does Retexcycle help with EUDR compliance?

Retexcycle captures geolocation data directly at the farm with Retexcycle Origins, and keeps it with preserved identity through every collection, blend and transformation up to the final DDS. On the European buyer's side, Retexcycle Compliance Hub centralises your suppliers, assesses their country risk and generates the declaration ready for TRACES NT, without having to reconstruct origin data by hand.

How does Retexcycle capture geolocation data at origin?

Retexcycle Origins collects geolocation directly on the ground, at the moment of collection, instead of reconstructing it later from paperwork. Each plot is linked to its batch from the very first moment, with the corresponding point or polygon depending on its size, ready to feed into the DDS without extra work.

How does Retexcycle preserve batch identity?

Retexcycle tracks each batch through collection, blending and transformation without losing its link to the plot of origin, instead of merging it with batches from a different provenance. So when it's time to declare in TRACES NT, every unit of product still has a specific plot backing it up.

How does Retexcycle generate a DDS ready for TRACES NT?

Retexcycle Compliance Hub brings together geolocation, country risk assessment and traceability for each batch in one place, and generates the declaration in the format and fields TRACES NT requires. This avoids the manual work of pulling together scattered data from different suppliers and documents before every shipment.

Does Retexcycle assess country risk automatically?

Yes, Retexcycle Compliance Hub applies country risk classification directly to your registered suppliers, so you can see at a glance which part of your chain needs more evidence or extra checks. You don't need to look up the classification separately or cross-check it by hand for each supplier.

What is the difference between Retexcycle Origins and Retexcycle Compliance Hub?

Retexcycle Origins is built for exporters and producers: it captures traceability from the farm. Retexcycle Compliance Hub is built for European importers and operators: it receives that origin traceability and turns it into a declaration ready for TRACES NT. Both products connect to each other, so data captured at origin reaches the European buyer without needing to be rebuilt.

Can Retexcycle verify mass balance across blends and transformations?

Yes, Retexcycle tracks the quantity of raw material declared as deforestation-free through every blend and transformation, to confirm that what goes into a process matches what comes out of it. This is what keeps a DDS valid when a batch goes through several stages before reaching the final product.

How long does it take to implement Retexcycle in my supply chain?

The time depends on how many suppliers and plots you need to onboard, but the first pilot batch is usually traced in about 15 days, depending on workload. You can also try Retexcycle Origins free for 15 days to see how it behaves with your real chain before deciding.

Does Retexcycle work for commodities other than coffee and cocoa?

Yes, Retexcycle is designed for any of the commodities covered by the EUDR: coffee, cocoa, soy, palm oil, wood, rubber and cattle, as well as biomass certified under RED III/SURE. The geolocation capture and mass balance mechanism is the same, adapted to the specifics of each chain.

Can I try Retexcycle before committing to it?

Yes, you can request a demo using your own origin data, with no commitment, to see how Retexcycle performs with your actual supply chain before deciding. It's the most direct way to check whether the system fits your suppliers and the volume of plots you need to trace.

How does Compliance Hub record my role under the EUDR?

It stores the operator's identification (company name, tax ID or VAT, EORI, address, role, size, Annex I products, HS codes and countries of origin) in a governance questionnaire with history: each save creates a new version.

How do I demonstrate my due diligence system with Retexcycle?

Each statement generates a file with its sealed version, its associated documents (PDF and ZIP) and the date until which it must be kept, five years. Each operation is logged with its author and time, there are seven predefined roles and two-step verification.

What does Compliance Hub's geolocation validator do?

It analyses, normalises and validates GeoJSON files before they are incorporated: syntax, valid geometry, WGS84 coordinates with at least six decimals, area, point or polygon by the 4-hectare threshold, and overlaps and duplicates. It accepts files of up to 25 MB and gives the result per plot.

How does Origins capture the plot in the field?

The mobile app captures the polygon by GPS, with QR reading, photos and offline mode. It then validates the geometry, runs the satellite analysis and exports a GeoJSON (RFC 7946) with one plot per polygon, linked to producer, volume and transaction.

How does Compliance Hub assess country and shipment risk?

It starts from the Commission's official country classification list (194 countries, with category, source and review date) and lets you assess a country once and reuse it across all shipments. Each shipment has a preliminary traffic light; the final decision is always human and is sealed with the person responsible and the date.

How does Origins score each supplier's risk?

It scores each supplier from 0 to 100 by combining satellite data, the due diligence questionnaire, production capacity and attached documentation, and classes the result as blocking critical issues, mitigable alerts and correct points. The questionnaire covers six areas: land, environment, third parties and consent, working conditions, human rights, and taxes and trade. Each risk ends in a decision: proceed, request information or block.

How does Compliance Hub manage statements in TRACES NT?

The statement list shows the status of each one in TRACES NT (active, drafts, submitted, available, consolidated and rejected), with its reference and verification numbers. A three-step wizard (type, shipments and confirmation) lets you create it per shipment, periodic, simplified or consolidated. The connection to TRACES NT uses API V3.

How does Compliance Hub manage references and substantiated concerns?

It has a reference ledger where you receive and verify your suppliers' reference numbers and keep the ones you pass on to your customers. Substantiated concerns are recorded with their origin and the shipment or reference affected; once saved, what is affected is blocked until the verification is resolved.

What does the Compliance Hub dashboard show?

What is pending, what risk there is and what the next step is: shipments awaiting risk assessment, shipments without complete data, supplier requests without a reply, suppliers without deforestation analysis, rejected statements and expired documents, together with a countdown to each regulatory date.

Frequently asked questions about the PPWR

Regulation (EU) 2025/40 on packaging and packaging waste: dates, obligations by role, EU declaration, technical file, EPR and PFAS.

The Regulation: what it is and when it applies

What is the PPWR?

It is Regulation (EU) 2025/40 on packaging and packaging waste. It replaces the old Directive 94/62/EC and, being a regulation (not a directive), it applies directly in all 27 Member States without each country needing to transpose it into its own legislation.

What types of packaging does the PPWR apply to?

To all of them: the Regulation applies to all packaging, regardless of the material it is made from, and to all its waste, whether from industry, retail or wholesale trade, offices, services or households (art. 2). No packaging or sector is excluded by default.

When does it come into force?

It entered into force on 11 February 2025. Most obligations (conformity assessment, PFAS, technical file, DoC, EPR registration) are enforceable from 12 August 2026. The rest are phased in through 2040, with milestones in 2027, 2028, 2029, 2030, 2035 and 2038.

What is the Commission guidance document on the PPWR?

It is Commission Communication C/2026/3084, published in the Official Journal on 10 June 2026. It interprets the Regulation and is very useful for manufacturers and authorities, but it is not binding: only the text of the Regulation has legal force.

Which parts of the PPWR depend on acts that are still pending?

Several. The legal deadline for the implementing acts on harmonised labelling (art. 12) was 12 August 2026 and passed without their adoption, so its dates shift. The delegated acts on recyclability (art. 6(4)) are due by 1 January 2028 and those on recycled content (art. 7) by 31 December 2026.

Can the PPWR dates or requirements change?

Yes. Besides the pending acts, there is a Commission proposal (COM(2025) 982) to suspend the authorised-representative obligation for EPR for producers established in the EU, still under negotiation. There are also annulment actions before the General Court against articles 25, 29 and 50 and annexes V and X, without suspensive effect: until there is a ruling, they apply.

What happens to packaging already manufactured before August 2026?

The Regulation repeals the old Directive 94/62/EC as of 12 August 2026, but with a transitional regime: several of its articles remain applicable until specific dates (31/12/2028 and 31/12/2029, depending on the requirement) while the delegated and implementing acts that replace them are adopted (art. 70). Not everything changes overnight on the same day.

How does the PPWR differ from the EUDR?

They are two different European regulations, and both can apply to you at once. The EUDR regulates deforestation in the supply chain of certain raw materials (wood, cocoa, coffee, soy, among others) before they reach the EU. The PPWR regulates the packaging itself: its design, materials, labelling and end of life, regardless of what it contains. If you export or import packaged products made with raw materials covered by the EUDR, it's common to need to comply with both regulations in parallel.

What counts as packaging under the PPWR?

Any product, of any material, intended to contain, protect, handle, deliver or present goods (art. 3(1)(1)). Annex I gives examples of what is and is not packaging, and the Commission clarifies that the list is indicative.

Who it affects and what role you have

Who does it affect?

The Regulation legally defines 7 categories of "economic operator": manufacturer, supplier, importer, distributor, authorised representative, final distributor and logistics service provider (art. 3.12). In practice, depending on what you do with each package, you can fit into up to 21 different roles with their own obligations (producer, end user, reuse operator, etc.).

Who is the manufacturer under the PPWR?

Whoever makes a package, or has it made and places it on the market under their own name or brand (art. 3(1)(13)). An importer or distributor that places a package under its own name or brand, or modifies it, becomes the manufacturer (art. 21). The manufacturer is responsible for conformity and signs the EU declaration (art. 39(4)).

Who is the importer under the PPWR?

A person established in the Union, with legal personality, who places on the market a package coming from a third country (art. 3(1)(17)). According to the Commission Communication, a branch without legal personality is not an importer.

What must a distributor or an importer check?

Before placing a package on the market, they must verify that the manufacturer has met its obligations: that the package carries the required identification and that the EU declaration and technical documentation exist. If they detect non-compliance, they do not place it on the market until it is corrected (arts. 18 and 19).

Who is the producer for EPR purposes?

In each Member State, it is the manufacturer, importer or distributor that first places packaging or packaged products on the market in its territory (art. 3(1)(15)). Being a producer is not a separate role: it adds to that of manufacturer, importer or distributor and brings the registration and EPR obligations (arts. 44 and 45).

If I sell in several countries, am I a producer in all of them?

Only in the Member States where you first place products on the market, for example by selling directly to end users or from your own establishment. If you sell to a supermarket in another country, that supermarket is the producer there. The obligation is determined package by package and country by country.

What is a microenterprise for PPWR purposes?

A company with fewer than 10 people and a turnover or balance sheet of at most 2 million euros, under Recommendation 2003/361/EC as applicable on 11 February 2025. If you commission a package under your brand from a microenterprise supplier in the same Member State, that supplier is the manufacturer (art. 3(1)(13)(b)).

Are there exemptions for SMEs or microenterprises?

Yes, there are several special rules. The most relevant: if you commission the design or manufacture of a package under your brand from a supplier that is a microenterprise in your own Member State, the law considers the supplier, not you, the "manufacturer" (art. 3.13). There are also microenterprise nuances in several reuse and EPR obligations.

Does it affect me if my company is outside the EU?

Yes, if you sell packaging or packaged products within the EU. The "importer" (art. 3.17) is always a person or company established in the Union that brings the packaging in from a third country, so if your company is outside, you need an importer or an authorised representative established in the EU to assume those obligations on your behalf.

Substances, design and recyclability

What heavy-metal limit does the PPWR set?

Article 5(4) limits the sum of lead, cadmium, mercury and hexavalent chromium to 100 mg/kg in packaging and its components. There are exceptions, such as those for glass with recycled material and crystal glass (Decision 2001/171/EC, amended by Delegated Decision (EU) 2026/1948) and for plastic crates and pallets (Decision 2009/292/EC).

What PFAS limits does the PPWR set for food-contact packaging?

Since 12 August 2026, PFAS are restricted in food-contact packaging, with limits of 25 ppb (specific analyses), 250 ppb (sum) and 50 ppm (total fluorine) (art. 5.5).

Do the PFAS limits apply to all packaging?

No. Article 5(5) applies them to packaging intended to come into contact with food. The criterion is placing on the market from 12 August 2026: packaging placed on the market before that date is not affected.

How do I show that a package meets the PFAS limit?

With laboratory analysis and information from your supplier. The Commission Communication proposes a tiered approach: a total fluorine content below 50 mg/kg could be considered indicative of compliance. The results and the supplier's declaration should be included in the technical file.

Which recyclability grades does the PPWR require?

Packaging is classified into grades A, B or C by its recyclability percentage (Annex II, table 3): A, 95 % or more; B, 80 % or more; C, 70 % or more. Below 70 % it cannot be placed on the market. It must be A, B or C from 1 January 2030 (or 24 months after the delegated acts, if later) and only A or B from 1 January 2038.

Do I already have to demonstrate the recyclability of my packaging?

Article 6(1) applies from 12 August 2026, but the Commission clarifies that manufacturers do not need to carry out the conformity assessment for recyclability until the delegated acts on design for recycling enter into force. It is advisable to start collecting composition data now.

What recycled content does the PPWR require in plastic packaging?

From 1 January 2030 (or three years after the implementing act under art. 7(8), if later): 30 % for contact-sensitive PET packaging, 10 % for other contact-sensitive packaging, 30 % for single-use beverage bottles and 35 % for the rest. By 2040 these rise to 50 %, 25 %, 65 % and 65 %. It is calculated as an average per manufacturing plant and year.

Which packaging must be compostable?

Only two formats: permeable tea, coffee or other beverage bags and fruit and vegetable stickers (art. 9(1)). Other cases, such as non-metallic capsules and some bags, are regulated in art. 9(2). All other packaging is designed for recycling. The reference date is 12 February 2028.

What is empty space and what is the PPWR limit?

It is the part of the packaging not occupied by the product. From 1 January 2030 (or 36 months after the implementing act under art. 24(2), if later), empty space may not exceed 50 % in grouped, transport and e-commerce packaging (art. 24(1)). Filler counts as empty space.

Are false bottoms and double walls banned?

Article 10(2) restricts packaging with double walls, false bottoms or unnecessary layers. According to the Commission Communication, paragraphs 1 and 2 of article 10 apply from 1 January 2030, with the exceptions in the article itself.

Which packaging formats does Annex V restrict?

Article 25 and Annex V restrict six uses of single-use plastic packaging, for example certain packaging for fresh fruit and vegetables under 1.5 kg, from 1 January 2030, with exceptions. The Commission must publish guidelines by 12 February 2027 at the latest. Composite packaging with 5 % or more plastic falls under points 1 to 4. This article is challenged before the General Court, without suspensive effect.

What are deposit, return and refund systems?

Article 50 requires each Member State to ensure, by 1 January 2029 at the latest, the separate collection of at least 90 % by weight per year of single-use plastic bottles and metal beverage containers of up to three litres. To achieve it they set up deposit and return systems; States that already collected 80 % in 2026 may be exempt if they submit a plan before 1 January 2028 (art. 50(5)).

Reuse, deposit and hospitality

What reuse targets does the PPWR set?

Article 29 sets targets for certain transport packaging: at least 40 % reusable from 1 January 2030 and 100 % in certain uses, such as transport between sites of the same operator. For 2040, 70 % is to be sought. Delegated Decision (EU) 2026/429, in force since 26 May 2026, exempts pallet wrapping and strapping from the 100 % rates of paragraphs 29(2) and (3).

What must a final distributor of beverages offer in reusable packaging?

From 1 January 2030, a final distributor selling beverages must offer at least 10 % of them in reusable packaging within a reuse system; by 2040, 40 % is to be sought (art. 29(6)). There are exemptions, for example for establishments of up to 100 m² (art. 29(10)).

What obligations does the hospitality sector have for take-away packaging?

From 12 February 2027 it must accept the consumer's own container for take-away drinks and food (art. 32). From 12 February 2028 it must also offer a reusable packaging option (art. 33), with a 10 % target from 2030. Only article 33 provides an exemption for microenterprises.

Documentation, conformity and labelling

How is the conformity of a package assessed?

The manufacturer applies the internal production control procedure (module A, art. 38): it draws up the Annex VII technical documentation, checks that the package meets the requirements and issues the EU declaration of conformity (art. 39). The authorities may request the documentation (art. 15(8)).

What is the PPWR EU declaration of conformity?

It is the document in which the manufacturer declares that each packaging type complies with the Regulation. It is drawn up following the model in Annex VIII, one per packaging type, and kept up to date (arts. 15 and 39). Retexcycle only allows it to be signed once the technical file and the bill of materials are approved.

What is the Annex VII technical file?

It is the technical documentation the manufacturer prepares per packaging type before placing it on the market, within the internal production control procedure (module A). Retexcycle generates the 32 Annex VII templates and the 23 declaration-kit templates (Annex VIII) with your hub data.

How long must the technical file and the declaration be kept?

Five years from placing on the market for single-use packaging and ten years for reusable packaging (art. 15.3).

Do I need to renew the documentation if the package changes?

Yes. The manufacturer must reassess conformity when it detects that a change in design, composition or applicable standards could affect it (art. 15(4)), and update the technical file and the EU declaration.

What information must my packaging supplier give me?

Article 16 requires suppliers to give the manufacturer the information and documentation it needs to demonstrate conformity, including that on food contact, in the required language and on paper or in electronic format. That is why it is worth requesting a documentation package from each supplier.

What is the identification of economic operators?

Article 22 requires operators to be able to identify the economic operators that supplied them with packaging and those they supplied it to. Keeping this data for five years (ten for reusable packaging) is required for the identity of whoever supplied you.

Within what time must I hand over the documentation to an authority?

When an authority requests it with reasons, the manufacturer must provide the technical documentation and the EU declaration within ten days (art. 15(8) and (10)). That is why it is worth keeping them organised and versioned.

What identification must the package carry?

Article 15(5) requires a type, batch or serial number, or an element that allows the package to be identified, and 15(6) requires the manufacturer's name, brand and contact details, in a clear and legible way (15(7)). This identification applies from 12 August 2026; the harmonised label will come later.

When will the PPWR harmonised label become mandatory?

The reference date is 12 August 2028, but the implementing acts that develop it were not adopted on time, so it will shift to 24 months after their entry into force (30 months for reusable packaging). It is advisable to prepare the packaging data, but not to print final artwork.

EPR, penalties and Spain

What is EPR and who must register?

Extended producer responsibility (EPR) requires the producer to register in each Member State where it places goods on the market, report quantities per material every year and contribute to their management (arts. 44 and 45). Anyone selling at a distance from another country needs an authorised representative for EPR.

Do I need an authorised representative for EPR?

Article 45(3) requires a producer selling at a distance to end users in another Member State to appoint an authorised representative for EPR in that country. The Commission has proposed suspending that obligation for producers established in the EU (COM(2025) 982): it is only a proposal, not law in force. Producers established in third countries are outside the suspension.

What happens if I don't comply? Are there fines?

Yes. Each Member State must have its own penalty regime in force before 12 February 2027, with "effective, proportionate and dissuasive" penalties (Art. 68). For Articles 24 to 29 (reuse and empty space) the law specifically requires administrative fines. The Regulation does not set specific amounts: each country decides.

What is the plastic tax in Spain and how does it relate to the PPWR?

It is the special tax on non-reusable plastic packaging under Law 7/2022: 0.45 euros per kilo of non-recycled plastic, with a quarterly return on form 592. It is a national tax, separate from the PPWR and EPR, that applies in Spain in addition to them.

Is Royal Decree 1055/2022 still in force in Spain?

As of November 2026, Royal Decree 1055/2022 has only its initial text published, without amendments. The Ministry for Ecological Transition (MITECO) has published notes on how it applies alongside Regulation (EU) 2025/40, including an interpretative note on the definition of producer (13/08/2026). It is worth consulting them for registration and the annual return.

Does Compliance PPWR replace Ecoembes or my PRO?

No. The PPWR coexists with extended producer responsibility (EPR), which in Spain is managed by collective schemes such as Ecoembes. Registration, annual reporting and the payment of contributions follow their usual national channel. PPWR Compliance organises the documentation and evidence the Regulation itself requires (technical file, DoC, labelling, obligations calendar): it does not replace registration or payment with your PRO, it just keeps everything organised so nothing slips through.

How Retexcycle solves it

How do I know exactly which obligations apply to me?

It depends on your role and the type of your packaging, not on your sector. The self-assessment questionnaire (16 yes/no questions) detects your real roles and types and filters, out of the Regulation's 100 obligations, the ones that actually affect you.

How does the PPWR compliance Hub work?

You enter your company details and answer a questionnaire of 67 yes-or-no questions, grouped in 8 blocks. The Hub detects your roles (out of 21 possible) and your packaging typologies (out of 34), filters the ones that apply from the Regulation's 100 obligations and activates only the modules you need, with tasks, deadlines and evidence.

Can I find out which PPWR obligations apply to me without signing up for anything?

Yes. Retexcycle offers a free PPWR assessment of about three minutes that points you to your role and the obligations that may apply to you. For a full analysis per package, the PPWR compliance Hub starts from a more detailed questionnaire.

Which modules does the PPWR compliance Hub have?

It has 26 modules grouped by task: profile and roles, suppliers and requests; package records, bill of materials (BOM) and design requirements; Annex VII and VIII templates, technical file, EU declaration and release gate; labels, QR codes and batches; reuse; EPR, ecofee and plastic tax; and calendar, documents and custody. The wizard activates only those that apply to you.

What is the Hub's bill of materials (BOM)?

It is the composition of each reference by component: family, plant, weight, material and percentage of plastic and recycled content, linked to the supplier and its information package. It includes 20 families with templates, 31 materials and 30 validation rules. Each approved version is fixed with a SHA-256 fingerprint.

What is the release gate for the EU declaration?

It is the control that prevents signing the EU declaration if the technical file and the bill of materials are not approved. The declaration cites the version and SHA-256 fingerprint of the bill of materials: if the composition changes, it must be reissued. Only what is required on the issue date is included.

Which file and declaration templates does the Hub generate?

32 Annex VII templates (256 fields) and 23 Annex VIII templates (166 fields) per reference, filled in with the Hub's data and regenerated when it changes. There are also organisation templates, such as the authorised representative's mandate.

How do I request documentation from my suppliers?

The Hub generates supplier requests from a purchase order, with a 15-day access link and a portal where the supplier provides its article 16 package. You see progress by supplier and the upstream and downstream operators of article 22.

What is the Hub's digital passport with a QR code?

It is a GS1 Digital Link QR code per reference, batch or serial number that leads to a page with the package's information. The Hub manages the GS1 prefix, the resolver and the scan log.

How does the Hub manage reusable packaging?

With a pool and rotations module: 20 reusable formats, 11 event types and 7 statuses, units with QR (GRAI 8003), scan log, refurbishment, reports and a portal for the system's participants. It also includes the empty-space calculator and tracking of reuse targets.

Can the Hub prepare the annual EPR report?

Yes. It pre-loads data from the bill of materials and production, generates the report file in XML, JSON or CSV with its fingerprint and records the acknowledgement of submission. It tracks EPR deadlines, including those of RD 1055/2022 and article 44(7).

Does the Hub calculate the ecofee and the plastic tax?

It includes an ecofee engine with a fee modulated per reference, an ecodesign simulator and the PRO's tariffs, and a module for the tax on non-reusable plastic packaging under Law 7/2022: calculation at 0.45 euros per kilo of non-recycled plastic, quarterly return (form 592) and management of the recycled-plastic certificate.

How does the Hub preserve evidence?

With sealed custody: key records (bill of materials, declarations, acknowledgements and files) are sealed with SHA-256 and a chain hash, the whole chain can be verified and an evidence package exported. Retention is defined per record, with the 5 or 10-year periods.

How do I know the Hub is up to date with the regulation?

The Hub includes a sources tab (consolidated Regulation, corrections, delegated decisions, Commission Communication), a list of open points with what is not yet decided, such as the labelling acts, and the date of its regulatory corpus. Warnings flag which dates depend on pending acts.

Does using the Hub guarantee that my packaging complies?

No. Responsibility for conformity lies with the manufacturer (art. 39(4)). The Hub organises the data, generates the documents, stores the evidence and blocks signing if something is missing, but the decision and the signature are yours. It does not replace legal advice.

Frequently asked questions about carbon footprint

Product carbon footprint under ISO 14067: what it is, which standards apply, what data you need and how it relates to the EUDR and the PPWR.

Concepts and standards

What is a product carbon footprint?

It is the sum of the greenhouse gas emissions associated with a product over its life cycle, expressed in kilos of CO₂ equivalent per unit of product. It lets you compare products and see at which stages emissions are concentrated.

What is ISO 14067?

It is the international standard that sets the principles, requirements and guidelines for quantifying and communicating a product's carbon footprint. Retexcycle structures the calculation to comply with this standard.

What is the difference between the corporate carbon footprint and the product footprint (PCF)?

The corporate footprint measures the emissions of the entire organisation over a year (Scopes 1, 2 and 3 of the GHG Protocol). The product footprint (PCF, Product Carbon Footprint) calculates the emissions associated with a specific unit of product across its life cycle, typically "cradle-to-gate" or "cradle-to-grave". They are complementary but distinct calculations: the customer, retailer or regulator usually asks for the per-product figure, not the company aggregate. Retexcycle calculates the PCF from the real data of each batch.

Which standards and frameworks apply when calculating the product footprint?

The most widely used reference frameworks are ISO 14067 (product carbon footprint), ISO 14040/14044 (life cycle assessment), the GHG Protocol Product Standard and, in the EU, the PEF method (Product Environmental Footprint) with its PEFCR category rules. To communicate the result to the market, an EPD (Environmental Product Declaration) verified under ISO 14025 is commonly used. Retexcycle structures the inventory in line with these standards so the result is defensible under audit.

What is Scope 3 and why does it weigh so much?

These are the indirect emissions of the value chain (suppliers, transport, use and end of life), distinct from those the company itself generates (Scope 1) and from the energy it buys (Scope 2). In agri-food products it usually concentrates most of the footprint, which is why having data from each supplier matters.

What is land use change (LUC) in the footprint?

It is the emissions associated with converting land, for example from forest to cropland, and in agricultural products it can weigh heavily in the footprint. Retexcycle lets you configure LUC parameters per plot (carbon stocks, amortisation period and establishment year) instead of using a generic average.

How does the product footprint relate to CBAM and the Digital Product Passport?

CBAM (the Carbon Border Adjustment Mechanism) requires declaring the embedded emissions of certain imported products (steel, aluminium, cement, fertilisers, etc.), and from 2026 it entails payment for those emissions. The Digital Product Passport (DPP), arriving with the ESPR ecodesign regulation, will include environmental information per product. In both cases the starting point is the same: a traceable, verifiable per-product footprint figure. Calculating your PCF properly today leaves you prepared for both requirements.

Data and verification

Why does it matter to use primary data instead of generic emission factors?

Generic databases (sector averages) are useful for a first approximation, but they do not reflect your real chain and produce poorly differentiated results. More and more schemes — and the European regulatory trend itself — require primary or supplier-specific data for the most relevant stages, especially in Scope 3, which usually concentrates most of the footprint. Using primary data reduces uncertainty, improves the audit score and makes it possible to demonstrate real year-on-year improvements. Retexcycle prioritises the capture of primary data per batch and supplier.

How long does it take to calculate a product's footprint and what data do I need?

It depends on the complexity of the chain, but the greatest effort is not the calculation, but gathering and validating the data: energy and fuel consumption, raw materials and their origins, transport, losses and waste per stage. With the information organised, a PCF can be ready in weeks rather than months. Retexcycle reduces that time by structuring the capture per stage and reusing the traceability data you already collect for other purposes.

Do I need external verification for my product footprint to be credible?

It is not always mandatory, but verification by an independent third party is what gives credibility with customers, retailers and regulators, and it is a requirement for publishing an EPD or making environmental claims without the risk of greenwashing. The forthcoming Green Claims Directive tightens this point. That is why it is advisable to calculate from the outset with traceable data and organised documentation: Retexcycle leaves the inventory and the evidence ready for the verifier to work without friction.

How Retexcycle solves it

How does Retexcycle calculate the product carbon footprint?

Retexcycle calculates the footprint per batch from your field data (consumption, raw materials, transport, losses and waste) and traceability data, instead of using sector averages, and generates a report in line with ISO 14067.

How are the carbon footprint, the EUDR and the PPWR related?

They are different regulations, but they share the need for traceable data by batch and origin. That is why Retexcycle uses one traceability base for the EUDR, the PPWR and the product carbon footprint.

Which emission factors does Retexcycle use?

It applies recognised methodological factors (IPCC and ecoinvent) under ISO 14067 and the GHG Protocol. The data you provide, such as consumption and yields per batch, always take priority over reference values.

What do I receive when the footprint is calculated?

A final product footprint per batch and a report in line with ISO 14067, ready for customers, audits and ESG reporting, with the inventory and evidence it is based on.

Can I reuse EUDR data for the footprint?

Yes. The plot and origin data you capture for the EUDR feed the footprint calculation, without duplicating work: it is a single database for compliance and carbon.

How do I start calculating the footprint with Retexcycle?

In five steps: setting up your workspace and team access, loading producers, batches and traceability, hands-on training, a pilot with real data before scaling and going live with ongoing support.

Can I connect Retexcycle to my systems?

Yes, through an open API, without forcing the producer to change the way they work.

Every plot geolocated. Every batch traced. Every shipment compliant.

A personalized demo with your own origin data. No commitment.